Nordic Flash
Adhesive Mounts for GoPro Cameras
Nordic Flash adhesive mounts are three curved and three flat mounts with 3M adhesive pads, made for GoPro Hero cameras. Stick them on helmets, boards, surfboards, kayaks and car hoods. You can reuse a mount by putting a new adhesive pad on the back; the pads come separately. To take a mount off, warm the pad with a hair dryer first.
- Sold and shipped through Amazon in the United States
- Order questions: Your Orders on Amazon or [email protected]
- Designed by founder Henrik Andersson
Key features
- Six mounts. Three curved for rounded surfaces such as helmets, three flat for boards and hoods.
- Reusable with a new pad. Put a new adhesive pad on the back; the pads come separately.
- Made for GoPro Hero cameras. The Amazon listing says they fit all GoPro Hero models, including Hero 12 and Hero 1.
- Easy removal. Warm the pad with a hair dryer first.
Who it is for
- GoPro Hero cameras on helmets, boards, surfboards, kayaks and car hoods
Not the right pick for
- Sticking a used pad in a new spot: put a new adhesive pad on the back first; the pads come separately
- Keeping a camera afloat: pair the mount with a camera float when you film on the water
Specifications
| In the pack | 3 curved and 3 flat mounts |
|---|---|
| Adhesive | 3M pads; reuse a mount with a new pad, sold separately |
| Removal | Warm the pad with a hair dryer first |
| Compatible (per the Amazon listing) | All GoPro Hero models, including Hero 12 and Hero 1 |
| Where to buy | Amazon (United States) |
What's in the box
- 3 curved adhesive mounts
- 3 flat adhesive mounts
- 3M adhesive pads
Questions about the adhesive mounts
Which cameras do the adhesive mounts fit?
They are made for GoPro Hero cameras. The current Amazon listing says they fit all GoPro Hero models, including Hero 12 and Hero 1.
Can I reuse the adhesive mounts?
Yes. After you take a mount off, put a new adhesive pad on the back and you can use it again. The pads come separately. To remove a mount, warm the pad with a hair dryer first.
Why did my adhesive mount come loose?
Adhesive only holds if the surface is ready for it. Follow GoPro's prep: use a clean, smooth, dry surface, apply the mount at room temperature, press it on so the pad has full contact, and wait at least 24 hours before use. See GoPro's guide to applying and removing adhesive mounts (opens in a new tab). If you want to use the mount again, put a new adhesive pad on the back. The pads come separately.
Where can I stick the adhesive mounts?
On helmets, boards, surfboards, kayaks and car hoods. Use a curved mount on rounded surfaces and a flat mount on flat ones.
Where do I place an order?
All Nordic Flash orders are placed and shipped through Amazon in the United States. For a question about an order, open Your Orders on Amazon or email [email protected].